SiBE18-821_C
2.2
Removal of Electronic Expansion Valve Coils
Procedure
Step
Detach the clamp of the
1
wire harnesses.
Remove the 4 screws
2
and remove the
electrical component
mounting plate.
3
Remove the 4 screws
and remove the bottom
plate.
Removal Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Electrical component mounting plate
Preparation
Remove the PCB assembly
according to the "Removal of
PCB Assembly".
(Q0509)
(R12991)
Bottom plate
(R12992)
BP Unit
Points
(R9272)
457