Daikin Super Multi Plus E-Series FTXG25EV1BW Service Manual page 156

Field Settings
Push the BS2 (SET button) and match with the LEDs No. 1 - 15, push the BS3 (RETURN
button), and confirm the data for each setting.
★
ways of expressing are as follows:
★
144
Data such as addresses and number of units is expressed as binary numbers; the two
The No. 1 cool/heat unified address is expressed as a binary
Figure 1
number consisting of the lower 6 digits. (0 - 63)
l h l h l l h
16 4 1
In the figure 1, the address is 010110 (binary number), which
32 8 2
translates to 16 + 4 + 2 = 22 (base 10 number). In other words, the
(R12951)
address is 22.
Figure 2
l h h h l h l
The number of terminal blocks for No. 12 and 13 is expressed as
an 8-digit binary number, which is the combination of four upper,
64 16
No.12
128 32
and four lower digits for No. 12 and 13 respectively. (0 - 128)
In the figure 2, the address for No. 12 is 0101, the address for No.
l h h h l l h
13 is 0110, and the combination of the two is 01010110 (binary
4 1
number), which translates to 64 + 16 + 4 + 2 = 86 (base 10
No.13
8 2
number). In other words, the number of terminal block is 86.
(R12952)
See the preceding page for a list of data, etc. for No. 0 - 25.
SiBE18-821_C
Test Operation and Field Settings