Daikin Super Multi Plus E-Series FTXG25EV1BW Service Manual page 171

SiBE18-821_C
BRC1E51A7
a
a Unit No.
b First code No.
c Second code No.
d Mode
Test Operation and Field Settings
d
Field setting list
Unit No Mode
Return Setting
Step Action
1 Press and hold the [Cancel] button (
for 4 seconds to enter the Field setting
menu.
2 Use the buttons to select Field
setting list and push the [Menu/Enter]
button ( ).
3 Use the buttons to select the desired
Mode.
4 During group control, when setting by each
indoor unit (Mode 20, 21, 22 and 23 have
been selected), push the
highlight and
INDOOR UNIT NO. to be set. This
operation is unnecessary when setting by
group.
5 Highlight the second code No. to be
changed using the
the buttons to select the desired
second code No.
6 Push the [Menu/Enter] button (
display the confirmation screen.
7 Use the buttons to select Yes and push
the [Menu/Enter] button (
8 Push the [Cancel] button (
return to basic screen.
c
(R12878)
)
button to
buttons to select the
buttons, and use
) to
).
) 2 times to
Field Settings
Remote controller
Field setting
Test operation ON/OFF
Register Service Contract
Field setting list
Group No. setting
Indoor unit Airnet No. set
Outdoor unit Airnet No. set
Setting
Return
(R12879)
When setting by group, all of the
second code No. that may be set are
displayed as "*".
When multiple setting changes are
needed, repeat steps 3 to 7.
1/2
159