Daikin Super Multi Plus E-Series FTXG25EV1BW Service Manual page 53

SiBE18-821_C
3.1.5 FTXS60/71GV1B
Connectors and PCB (1): Control PCB
Other Parts
1) S1
2) S21
3) S25
4) S32
5) S41
6) S46
7) S47
8) H1, H2, H3, FG Connector for terminal board
9) V1
10) JA
11) LED A
12) FU1 (F1U)
PCB (2): Signal Receiver PCB
1) S48
PCB (3): Display PCB
1) S49
2) SW1
3) LED1 (H1P)
4) LED2 (H2P)
5) LED3 (H3P)
6) RTH1 (R1T)
PCB (4): INTELLIGENT EYE Sensor PCB
1) S36
Printed Circuit Board Connector Wiring Diagram
Connector for DC fan motor
Connector for centralized control (HA)
Connector for INTELLIGENT EYE sensor PCB
Connector for indoor heat exchanger thermistor
Connector for swing motors
Connector for display PCB
Connector for signal receiver PCB
Varistor
Address setting jumper
∗
Refer to page 154 for detail.
JB Fan speed setting when compressor stops for thermostat OFF
JC Power failure recovery function (auto-restart)
∗
Refer to page 157 for detail.
LED for service monitor (green)
Fuse (3.15 A, 250 V)
Connector for control PCB
Connector for control PCB
Forced operation ON/OFF button
LED for operation (green)
LED for timer (yellow)
LED for INTELLIGENT EYE (green)
Room temperature thermistor
Connector for control PCB
Indoor Unit
41