Adjustments - Exerpeutic 1000 Owner's Manual

ADJUSTMENTS

Adjusting the Tension Control Knob
To increase the load, turn the tension
control knob in a clockwise direction.
To decrease the load, turn the tension
Tension Control Knob
control knob in a counterclockwise
direction.
Adjusting the Incline
There are 3 incline angles (A: 8%,
B: 10%, C: 12%) that the incline adjuster
can be set to. Place one hand on the
rear end of the main frame, then lift the
rear end of the main frame up and use
Incline Adjuster
your other hand to adjust the Incline
C: 12%
adjuster to the desired position.
B: 10%
A: 8%
Anti-slip Pad
About the Running Belt
Anti-slip Pad
Keeping the Belt aligned
This belt is 16 inches wide. It is
recommended that the user's footsteps
stay on the central 12 inches area. This
will prevent the belt from shifting off the
center. Note: Continuously stepping on
the edge of the Belt will cause the Belt to
shift to either side of the bed.
300 mm of Suggested
Running Area.
13