Exerpeutic 1000 Owner's Manual page 11

ASSEMBLY
Step 3
Install Round Knob (24) to the bigger hole on the Stabilizer (4) and Main
Frame (1) by turning it in a clockwise direction to lock the Main Frame (1) in
place.
Note: Securely tighten Round Knob (24) so that the treadmill is
sturdy.
Plug the Hand Pulse Sensor Extension Wire (8) from the Handlebar (5) into
PULSE receptacle on the back of Computer (6).
Plug the Extension Sensor Wire II (9) from the Handlebar (5) into SENSOR
INPUT receptacle on the back of Computer (6).
10