Adjustments - Exerpeutic Magnetic Treadmill 4010.6-120116 Owner's Manual

ADJUSTMENTS

Adjusting the Tension Control Knob
To increase the load, turn the tension
control knob in a clockwise direction.
To decrease the load, turn the tension Tension Control Knob
control knob in a counterclockwise
direction.
Adjusting the Incline
There are 3 incline angles (A: 8%,
B: 10%, C: 12%) that the incline adjuster can be
set to. Place one hand on the rear end of the main
frame, then lift the rear end of the main frame up
and use your other hand to adjust the Incline
adjuster to the desired position.
Anti-slip Pad
About the Running Belt
Anti-slip Pad
Keeping the Belt aligned
This belt is 16 inches wide. It is
recommended that the user's footsteps
stay on the central 12 inches area. This
will prevent the belt from shifting off the
center. Note: Continuously stepping on
the edge of the Belt will cause the Belt to
shift to either side of the bed.
12 inches of Suggested
Running Area.
13