Lubrication - Exerpeutic 1000 Owner's Manual

LUBRICATION

The treadmill has already been spread with "Silicone Oil" in advance before
leaving the manufacturing plant. Silicone oil is without volatility and has
gradually permeated through the running belt. There will be no need to
re-spread the oil in normal circumstances. "Silicone Oil" may be re-spread once
the resistance has been increased and the running belt starts rubbing against the
running deck. To hold open the running belt from two sides, apply the silicone oil
with an even motion on the center of the running deck. Allow the silicone oil to
'set' for one minute before using the magnetic treadmill.
Attention: Only use "Silicone Oil" lubricants for this equipment. In addition, do
not add any other oil ingredient; otherwise the magnetic treadmill will be
damaged. Do not over-lubricate the running deck. Excess lubricant
should be wiped off with a clean towel.
15