Clearing Cache Table Of Dynamic Host Names; Showing Domain Name Resolution Information; Application Examples - D-Link xStack DGS-3610 Series Configuration Manual

DGS-3610 Series Configuration Guide
22.2.5 Clearing Cache Table of Dynamic
Host Names
This section describes how to clear the cache table of dynamic host names. If the command
clear host or clear host * is entered, the dynamic cache table will be cleared. Otherwise,
only the entries of specified domain names will be cleared.
Command
DGS-3610# clear host
[word]
22.2.6 Showing Domain Name Resolution
Information
This section describes how to display relevant configuration information of DNS.
Command
DGS-3610# show hosts
DGS-3610# show hosts
DNS name server
192.168.5.134
host
www.163.com
www.dlink.com.tw
22.2.7

Application examples

Ping the host with specified domain name:
DGS-3610# ping www.dlink.com.tw
Resolving host[www.dlink.com.tw]......
Sending 5,100-byte ICMP Echos to 192.168.5.123,
timeout is 2000 milliseconds.
!!!!!
Success rate is 100 percent(5/5)
Minimum = 1ms Maximum = 1ms, Average = 1ms
:
static
type address
static 192.168.5.243
dynamic 192.168.5.123
Chapter 22 DNS Configuration
Function
Clear the cache table of dynamic host names.
The host names configured statically will not be
removed.
Function
View related parameters of the DNS.
22-3