D-Link xStack DGS-3610 Series Configuration Manual page 351

DGS-3610 Series Configuration Guide
Command
Router(config-router)# neighbor
{address | peer-group-name}
maximum-prefix maximum
[warning-only]
Router(config-router)# neighbor
{address | peer-group-name}
distribute-list access-list-name
{in | out}
Router(config-router)# neighbor
{address | peer-group-name}
prefix-list prefix-list-name {in | out}
Router(config-router)# neighbor
{address | peer-group-name}
route-map map-tag {in | out}
Router(config-router)# neighbor
{address | peer-group-name}
filter-list path-list-name {in | out}
Router(config-router)# neighbor
{address | peer-group-name}
unsuppress-map map-tag
Router(config-router)# neighbor
{address | peer-group-name}
soft-reconfiguration inbound
Router(config-router)# neighbor
{address | peer-group-name}
route-reflector-client
Router(config-router)# neighbor
{address | peer-group-name}
shutdown
Use the no mode of above commands to disable the configured content.
If one peer is not configured with the remote-as, each of its members can use the neighbor
remote-as command to configure it independently.
Chapter 29 BGP Configuration
Meaning
(Optional) Limit the number of the route information
received from specified BGP peer (group).
(Optional) Configure to implement the routing strategy
according to the access list when the route information
is received from and sent to specified BGP peer
(group).
(Optional) Configure to implement the routing strategy
according to the prefix list when the route information is
received from and sent to specified BGP peer (group).
(Optional) Configure to implement the routing strategy
according to the route-map when the route information
is received from and sent to specified BGP peer
(group).
(Optional) Configure to implement the routing strategy
according to the AS path list when the route
information is received from and sent to specified BGP
peer (group).
(Optional) Configure to selectively advertise the route
information suppressed by the aggregate-address
command previously when it is distributed to specified
BGP peer.
(Optional) Restart the BGP session and reserve the
unchanged route information sent by the BGP peer
(group).
(Optional) Configure this switch as the route reflector
and specify its client.
(Optional) Shut down the BGP peer (group).
29-7