Viewing Related Information Of System Guard - D-Link xStack DGS-3610 Series Configuration Manual

Chapter 41 Anti-attack System Guard Configuration
Command
clear system-guard
[interface interface-id
[ip-address ip-address]]
41.2.8 Viewing Related Information of
System Guard
41.2.8.1 View Related Information of System Guard
Execute the show system-guard command to view the configuration parameters of the
system guard:
Command
show system-guard [interface
interface-id]
Here is an example:
DGS-3610# show system-guard
detect-maxnum number
device
isolated host number
inteface state
---------------------------- ----------------
Fa 0/1
Fa 0/2
......
DGS-3610# show system-guard interface Fa 0/1
detect-maxnum number
device
isolated host number
intefacestate solate time ame-attack-pkts
---------------------------- ----------------
Fa 0/1
41-6
: 100 ------ The maximum quantity of the hosts monitored by the
: 11 ----- The quantity of the hosts isolated by the device
isolate time same-attack-pkts
ENABLE 120
DISABLE 110
: 100 ------ The maximum quantity of the hosts monitored by the
: 11 ------------ The quantity of the hosts isolated by the device
ENABLE 120
DGS-3610 Series Configuration Guide
Meaning
Clear Isolated Users.
Where, clear system-guard indicates clearing all
isolated users;
clear system-guard interface interface-id indicates
clearing all users under that port;
clear system-guard interface interface-id ip-address
ip-address indicates clearing the specified IP user under
the interface.
Meaning
View the configuration parameters of the system guard.
scan-attack-pkts
------------------
20 10
21 11
scan-attack-pkts
20 10