Monitoring And Maintaining Dhcp Client; Configuration Examples; Address Pool Configuration Example; Manual Binding Configuration - D-Link xStack DGS-3610 Series Configuration Manual

Chapter 20 DHCP Configuration
Command
DGS-3610# show ip dhcp binding [address]
DGS-3610# show ip dhcp conflict
DGS-3610# show ip dhcp server statistics
20.6.2 Monitoring and Maintaining DHCP
Client
There are two types of commands for monitoring and maintaining the DHCP client. The
following operations can be performed on the client:
1. Debug commands, used to output necessary debugging information. Such commands
are mainly used to diagnose and clear faults.
2. Show commands, used to show information about DHCP.
To debug the DHCP client, execute the following command in the command execution
mode:
Command
DGS-3610# debug ip dhcp client
To show information about the lease that the DHCP client obtains, execute the following
command in the command execution mode:
Command
DGS-3610# show dhcp lease

20.7 Configuration Examples

This section provides three configuration examples:

Address Pool Configuration Example



Manual Binding Configuration



DHCP Client Configuration


20.7.1 Address Pool Configuration Example
In the following configuration, the address pool net172 is defined, the network segment of
the address pool is 172.16.1.0/24, the default gateway is 172.16.16.254, the domain name is
rg.com, the domain name server is 172.16.1.253, the WINS server is 172.16.1.252, the
NetBIOS node is of hybrid type, and the address lease period is 30 days. In this address
pool, all the addresses other than 172.16.1.2~172.16.1.100 can be assigned.
ip dhcp excluded-address 172.16.1.2 172.16.1.100
20-12
DGS-3610 Series Configuration Guide
Function
Show DHCP address binding information
Show DHCP address conflict information
Show DHCP server statistics information
Function
Debug the DHCP client
Function
Show information about DHCP lease