Table 40. Access Point RF Scan Status
Field
MAC Address
SSID
Physical Mode
Channel
Status
Transmit Rate
Beacon Interval
Discovered Age
Age
Monitoring Associated Client Information
You can view a variety of information about the wireless clients that are associated with the
APs the switch manages. To access the associated client information, click Monitoring >
Client > Associated Clients.
Figure 65. Associated Client Status
The following tabs are available:
Description
The Ethernet MAC address of the detected AP, this could be a physical radio
interface or VAP MAC. For D-Link Access Points this is always a VAP
MAC address.
Service Set ID of the network, this is broadcast in detected beacon frame.
Indicates the 802.11 mode being used on the AP.
Transmit channel of the AP.
Indicates the managed status of the AP, whether this is a valid AP known to
the switch or a Rogue on the network. The valid values are:
•
WS Managed - The neighbor AP is managed by this switch, the
neighbor AP status can be referenced using its base MAC address.
•
Peer WS Managed - The neighbor AP is managed by another switch
within the peer group.
•
Acknowledged Rogue - The AP is configured as a valid AP entry (local
or RADIUS), it has been acknowledged and is not reported as Rogue.
•
Ad Hoc Rogue - The AP neighbor was detected participating in an ad
hoc network.
Indicates the rate at which the AP is currently transmitting data.
Beacon interval for the neighbor AP network.
Time in seconds since this AP was first detected in an RF scan.
Time in seconds since this AP was last detected in an RF scan.
7 Monitoring Status and Statistics
Monitoring Associated Client Information
145