Setting Guidelines On The Rear View Image - Pioneer AVIC-8000NEX Operation Manual

System settings
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [Camera settings].
The following screen appears.
4 Touch [Parking assist guide] repeatedly
until the desired setting appears.
! Off (default):
Hides the guidelines.
! On:
Displays the guidelines.
When the shift lever is moved to the REVERSE
(R) position after setting the rear view camera,
the rear view image appears.
p If you press and hold the MAP button, the
rear view image disappears.
Setting guidelines on the
rear view image
CAUTION
! When adjusting the guidelines, be sure to
park the vehicle in a safe place and apply the
parking brake.
! Before getting out of the car to place the
markings, be sure to turn the ignition switch
off (ACC OFF).
! The range projected by the rear view camera
is limited. Also, the vehicle width and distance
guidelines displayed on the rear view camera
image may differ from the actual vehicle
width and distance. (The guidelines are
straight lines.)
! The image quality may deteriorate depending
on the usage environment, such as at night or
in dark surroundings.
1 Park your vehicle in a safe place and
apply the parking brake.
2 Using packing tape or similar, place
markings approximately 25 cm from each
side of the vehicle, and approximately
50 cm and 2 m from the rear bumper.
2 m (6 ft. 7 in.)
50 cm (1 ft. 8 in.)
Markings
Markings
Rear bumper
3 Press the HOME button to display the
Top menu screen.
4 Touch the following keys in the follow-
ing order.
The "System" screen appears.
5 Touch [Camera settings].
The following screen appears.
6 Touch [Parking assist guide adjust].
The following screen appears.
Chapter
31
25 cm
(9-7/8 in.)
25 cm
(9-7/8 in.)
153
En