Notes On Internal Memory; Before Removing The Vehicle Battery; Data Subject To Erasure; Resetting The Microprocessor - Pioneer AVIC-8000NEX Operation Manual

Introduction
"External storage device (USB, SD)"
The SD memory card, SDHC memory card,
microSD card, microSDHC card and USB
memory device are collectively referred to as
the "external storage device (USB, SD)". If it in-
dicates the USB memory only, it is referred to
as the "USB storage device".
"SD memory card"
The SD memory card, SDHC memory card,
microSD card and microSDHC card are col-
lectively referred to as the "SD memory card".
"iPod"
In this manual, iPod and iPhone will be re-
ferred to as "iPod".

Notes on internal memory

Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
p Some of the settings and recorded con-
tents will not be reset.

Data subject to erasure

The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
p Some of the settings and recorded con-
tents will not be reset.

Resetting the microprocessor

CAUTION
Pressing the RESET button resets settings and re-
corded contents to the factory settings.
p Do not perform this operation when a device
is connected to this product.
p Some of the settings and recorded contents
will not be reset.
The microprocessor must be reset under the
following conditions:
! Prior to using this product for the first time
after installation.
! If this product fails to operate properly.
! If there appears to be problems with the op-
eration of the system.
! If your vehicle position is shown on the
map with a significant positioning error.
1 Turn the ignition switch OFF.
2 Press the RESET button with a pen tip
or other pointed implement.
Settings and recorded contents are reset to
the factory settings.
8000NEX 7000NEX
6000NEX 5000NEX X8610BS
1
1 RESET button
Chapter
01
1
11
En