Operating The Time Bar; Operating The On-Screen Keyboard; On First-Time Startup Of The Navigation System - Pioneer AVIC-8000NEX Operation Manual

Basic operation
If you touch the key, the rest of the characters
are scrolled for display.
3 Appears when items cannot be displayed on a
single page only.
Drag the scrubber bar to view any hidden
items.
Also, you can drag the list to view any hidden
items.

Operating the time bar

1
1 You can change the playback point by drag-
ging the key.
p Playback time corresponding to the po-
sition of the key is displayed while drag-
ging the key.

Operating the on-screen keyboard

1
8
7
6
1 Displays the characters that are entered. If
there is no text in the box, an informative
guide with text appears.
2 Allows you to move the cursor to the right or
left for a number of characters equivalent to
the number of touches.
3 Touching the keys enters the characters in the
text box.
4 Deletes the input text one letter at a time, be-
ginning at the end of the text. Continuing to
touch the key deletes all of the text.
5 Confirms the entry and allows you to proceed
to the next step.
6 You can leave spaces.
A space equivalent to the number of touches
is inserted.
7 Switches between alphabet and numbers/
symbols.
8 You can switch between capital and lower
case letters.
On first-time startup of the
navigation system
When you use the navigation function for the
first time, an initial setup process starts auto-
matically. Follow the steps below.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following key.
2
p The first time that the MAP button is
pressed, the navigation system begins its
initial startup.
3
After a short pause, the splash screen comes
on for a few seconds.
4
The "Language" screen appears.
5
3 Select the language that you want to
use on the screen, then touch [Select].
p Later you can change it in "Regional" set-
tings.
Chapter
Initiates the initial startup of the
navigation system.
En
02
23