Pioneer AVIC-8000NEX Operation Manual page 24

Chapter
02 Basic operation
= For details, refer to Customizing the navi-
gation settings on page 47.
The "End User Licence Agreement" screen
appears.
4 Read the terms carefully, checking its
details, and then touch [Accept] if you
agree to the conditions.
The "Usage Reports" screen appears.
5 Touch [Yes].
The software collects usage information and
GPS logs that may be used for improving the
application and the quality and coverage of
maps.
p Later you can turn them on or off individu-
ally in the "Usage Reports" menu.
= For details, refer to Customizing the navi-
gation settings on page 47.
The configuration wizard starts.
6 Touch [Next].
The "Voice Language" screen appears.
7 Select the language that you want to
use for voice guidance messages, then
touch [Next].
p Later you can change it in "Regional" set-
tings.
= For details, refer to Customizing the navi-
gation settings on page 47.
24
En
8 If needed, modify the unit settings,
then touch [Next].
p Later you can change it in "Regional" set-
tings.
= For details, refer to Customizing the navi-
gation settings on page 47.
The "Route Preferences" screen appears.
9 If needed, modify the default route
planning options, then touch [Next].
p Later you can change it in "Route Prefer-
ences" settings.
= For details, refer to Customizing the navi-
gation settings on page 47.
10 Touch [Activate], then [Next].
A message saying that the connected online
features are activated appears if you activate
these services right away.
p You will need to install the AVICSYNC App
on your iPhone or smartphone first in order
to be able to use online services, which re-
quire a subscription. The service coverage
for each online service may vary depending
on the content provider providing the ser-
vice.
= For details, refer to "Connected Services"
settings on page 54.
11 Select the connected services you want
to use, then touch [Next].
The initial setup is now complete. The Map
screen appears and you can start using the
navigation system.