Switching The Automatic Disc Playback; Switching The Dimmer Setting For Sub-Display; Changing The Voice Output Of The Navigation Guidance; Other Functions - Pioneer AVIC-X1 Operation Manual

❒ Operation returns to normal when the
phone connection or the voice guidance is
ended.
❒ Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use the Hardware
Volume to control the navigation voice
guidance volume.
Switching the automatic disc
playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading slot.
When this function is on, the disc will be auto-
matically played after it is inserted into the disc
loading slot.
Initially, this function is set to OFF.
1
Touch "DISC AUTO" in the INITIAL
menu.
Touching "DISC AUTO" switches between
"ON" and "OFF".
Switching the dimmer setting
for sub-display
To prevent the sub-display from being too bright
at night, the sub-display is automatically dimmed
when the vehicle's headlights are turned on. You
can turn dimmer on or off.
1
Touch "SUB. D. DIM" in the INITIAL
menu.
Touching "SUB. D. DIM" switches between
"ON" and "OFF".
❒ Initially, this function is set to OFF.
Changing the voice output of the
navigation guidance
When there is a navigation guidance, you can
mix the guidance voice/beep sound from a navi-
gation with the audio sound from this system.
You can select the speaker output the navigation
guidance.
1
Touch "GUIDE VOICE" in the INITIAL
menu.
Each touch of the "GUIDE VOICE" changes
the settings as follows:
94
L+R (Front speakers) — R (Front Right
speaker) — L (Front Left speaker)

Other Functions

Setup adjustments

(1)
(1) Setup menu display
Shows the setup function names.
➲ How to display the SETUP menu ➞ Page 59

Setting the video input

You can switch the setting according to the con-
nected component.
• Select "VIDEO" to watch video of a connected
component as AV source.
• Select "M-DVD" to watch video of a connected
DVD player as S-DVD source.
1
Touch "AV INPUT" in the SETUP menu.
Each touch of the "AV INPUT" changes the
settings as follows:
• OFF — No video component is connected
• VIDEO — External video component
• M-DVD — DVD player connected with
RCA cable
When a DVD player is connected with an AV-
BUS cable, do not select "M-DVD" or else no
picture is displayed even if you select S-DVD.

Setting for rear view camera

The navigation unit features a function that auto-
matically switches to the rear camera image
(REAR VIEW CAMERA IN jack) when a rear view
camera is installed on your vehicle. When the
gearstick is in REVERSE (R) position, the screen
automatically switches to a rear view camera.
(For more details, consult with your dealer.) You
can also use the camera as a rear view camera
(Rear View). In this case, you can see the image
of the rear view camera during normal driving.