Pioneer AVIC-8000NEX Operation Manual page 44

Chapter
07 Registering and editing locations and routes
2 Scroll the map and select a location.
The cursor appears at the selected point.
3 Touch the following key.
Displays the list of additional fea-
tures on the certain screen.
# To edit a previously saved alert point, touch
.
4 Touch [Add Alert Points].
The "Add New Alert Point" screen appears.
5 Set the necessary parameters.
! Type of Alert:
Sets the type of the alert point.
! Speed Limit:
Sets the speed limit for this alert point (if
applicable).
! Direction of Alert:
Sets the direction from which you expect
the alert.
6 Touch [Save].
The location is saved as a new alert point.
= For details, refer to "Warnings" settings on
page 50.
p The warning for road safety cameras (like
speed cameras) is disabled when you are in
certain countries where road safety camera
warning is prohibited. However, you are
fully responsible for ensuring that this fea-
ture is legal in the country where you intend
to use it.
44
En