Protecting Your Product Against Theft; Removing The Detachable Faceplate; Attaching The Detachable Faceplate - Pioneer AVIC-8000NEX Operation Manual

Basic operation
d button
Press to remove the detachable faceplate
from this product.
= For details, refer to Removing the detach-
able faceplate on page 13.
Protecting your product
against theft
6000NEX 5000NEX X8610BS
The detachable faceplate can be detached
from this product to discourage theft, as de-
scribed below.
CAUTION
! Do not expose the detachable faceplate to ex-
cessive shock or disassemble it.
! Never grip the buttons tightly or use force
when removing or attaching the detachable
faceplate.
! Keep the detachable faceplate out of reach of
small children to prevent them from placing it
in their mouths.
! After removing the detachable faceplate, keep
it in a safe place so it is not scratched or da-
maged.
! Do not expose the detachable faceplate to di-
rect sunlight and high temperatures.
! When removing or attaching the detachable
faceplate, do so after turning off the ignition
switch (ACC OFF).
Removing the detachable
faceplate
p This product cannot be operated while the
detachable faceplate is removed from this
product.
1 Press the button.
When you release your finger, the bottom of
the detachable faceplate separates slightly
from this product.
2 Gently grip the bottom of the detach-
able faceplate and slowly pull it outward.
1
1 Detachable faceplate

Attaching the detachable faceplate

1 Slide the detachable faceplate all the
way into this product.
Make sure the detachable faceplate is se-
curely connected to the mounting hooks of
this product.
2 Push the lower part of the detachable
faceplate until you hear a click.
If you fail to successfully attach the detach-
able faceplate to this product, try again but be
careful not to force it as the panel could be
damaged.
Chapter
02
13
En