Setting For Rear View Camera; Switching The Auto Aerial Setting; Setting The Illumination Colour - Pioneer AVIC-D3 Operation Manual

MAN-AVIC-D3-EN.book Page 111 Monday, January 15, 2007 8:51 AM

Setting for rear view camera

The navigation system features a function that
automatically switches to the rear camera image
(REAR VIEW CAMERA IN jack) when a rear view
camera is installed on your vehicle. When the
gearstick is in REVERSE (R) position, the screen
automatically switches to a rear view camera.
(For more details, consult with your dealer.) You
can also use the camera as a rear view camera
(Rear View). In this case, you can see the image
of the rear view camera during normal driving.
• Pioneer recommends the use of a camera
which outputs mirror reversed images,
otherwise screen image may appear
reversed.
• Immediately confirm whether the display
changes to a rear view camera image when the
gearstick is moved to REVERSE (R) from
another position.
• When the whole screen changes to a rear view
camera image during normal driving, switch to
another setting.
Initially, this function is set to Off.
1
Touch "Camera" in the System menu.
2
Touch "Camera" to turn rear view camera
setting on.
Touching "Camera" switches between "On"
and "Off".
Unless this setting is "On", you cannot
switch to Rear View mode.
3
Touch "Polarity" to select an appropriate
setting for polarity.
Each time you touch "Polarity" switches
between the following polarity:
• Battery – When the polarity of the con-
nected lead is positive while the gearstick is
in the REVERSE (R) position
• GND – When the polarity of the connected
lead is negative while the gearstick is in the
REVERSE (R) position

Switching the auto aerial setting

If the blue lead of the navigation system is con-
nected to the auto aerial of the vehicle, select
either of the following settings.
• Tuner – Extends the aerial only for the Radio
source. The aerial is stored when the source is
switched to another source.
• Power – Extends the aerial when the ignition
switch is turned on. The aerial is stored when
the ignition switch is turned off.
1
Touch "ANT CTRL" in the System menu.
Touching "ANT CTRL" switches between
"Tuner" and "Power".
Regardless of whether "Tuner" or
"Power" is selected, turning off the igni-
tion switch will cause the aerial to auto-
matically retract.

Setting the illumination colour

The illumination colour can be selected from 11
different colours. Furthermore, the illumination
colour can switch between the 11 colours in
order.
1
Touch "Illumi Color" in the System menu.
2
Touch desired colour.
• White/Light Green/Green/Light Blue/
Blue/Yellow/Amber/Red
• Memory1/Memory2/Memory3
– Colours registered in the memory
• Scan – Shifts between the eight default col-
ours in sequence
"Creating a favourite colour and register-
ing it to memory" Page 112
111