Changing The Wide Screen Mode - Pioneer AVIC-8000NEX Operation Manual

Common operations
! (Off):
Deactivates the "Sound Retriever" func-
tion.
p Mode1 has a stronger effect than Mode2.
Changing the wide screen
mode
You can set the screen size for the video and
JPEG images.
p The default setting is "Full", and for JPEG
images is "Normal".
1 Touch the following key.
Displays the setting screen to select the
appropriate screen ratio for the play-
back video.
p The appearance of this key changes accord-
ing to the current setting.
2 Touch the desired mode.
! Full
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.
p This setting is for video only.
! Zoom
A 4:3 picture is enlarged in the same pro-
portion both vertically and horizontally;
ideal for a cinema-sized (wide screen) pic-
ture.
p This setting is for video only.
! Normal
A 4:3 picture is displayed normally, giving
you no sense of disparity since its propor-
tions are the same as those of the normal
picture.
p This setting is for video and JPEG
images.
! Trimming
An image is displayed across the entire
screen with the horizontal-to-vertical ratio
left as is. If the horizontal-to-vertical ratio
differs between the display and the image,
the image may be displayed partly cut off
either at the top/bottom or sides.
p This setting is for JPEG images only.
p You cannot operate this function while driv-
ing.
p Different settings can be stored for each
video source.
p When a video is viewed in a wide screen
mode that does not match its original as-
pect ratio, it may appear different.
p The video image will appear coarser when
viewed in "Zoom" mode.
Chapter
36
191
En