Restoring The Default Settings; Information On Each Option Of "Settings; Route Preferences" Settings - Pioneer AVIC-8000NEX Operation Manual

Chapter
10 Customizing preferences of the navigation
= For details, refer to "Usage Reports" set-
tings on page 54.
! Start Configuration Wizard:
Modifies the basic software parameters
used during the initial setup process.
= For details, refer to "Start Configuration
Wizard" settings on page 54.

Restoring the default settings

You can restore settings or recorded content
to the default settings.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
# This screen has several options. Touch
see the full list.
3 Touch [Settings].
The "Settings" screen appears.
4 Touch the following key.
Displays the list of additional fea-
tures on the certain screen.
5 Touch [Clear User Data].
A confirmation message appears.
6 Touch [Clear User Data].
The recorded contents are cleared.
Information on each option
of "Settings"

"Route Preferences" settings

Vehicle
You can set the type of vehicle you will use to
navigate the route. When you first touch this
key, you see the list of default vehicle profiles.
48
En
When creating a new vehicle profile, select
one of the vehicle types.
! Car:
— Maneuver restrictions and directional
constraints are taken into account when
planning a route.
— Roads are used only if access for cars is
allowed.
— Private roads and resident-only roads
are used only if they are inevitable to
reach the destination.
— Walkways are excluded from routes.
! Emergency:
— All maneuvers available at intersections
are taken into account.
— Directional constraints are taken into
account in the same way as travel in the
opposite direction is allowed at low
speeds.
— Only private roads that need to be used
to
to access the destination are included.
— Walkways are excluded from routes.
! Bus:
— Maneuver restrictions and directional
constraints are taken into account when
planning a route.
— Roads are used only if access for buses
is allowed.
— Private roads, resident-only roads and
walkways are excluded from routes.
! Taxi:
— Maneuver restrictions and directional
constraints are taken into account when
planning a route.
— Roads are used only if access for taxis is
allowed.
— Private roads, resident-only roads and
walkways are excluded from routes.
! Truck:
— Maneuver restrictions and directional
constraints are taken into account when
planning a route.
— Only roads that allow truck access are
included.
— Private roads, resident-only roads and
walkways are excluded from routes.