Searching For Points Of Interest (Poi); Searching For Pois Using Preset Categories - Pioneer AVIC-8000NEX Operation Manual

Chapter
05 Searching for and selecting a location
p If needed, you can select from different
route alternatives or change the route plan-
ning method before starting navigation.
= For details, refer to Checking route alter-
natives when planning the route on page
39.
Searching for Points of
Interest (POI)
Information about various facilities (Points Of
Interest – POI), such as gas stations, parking
lots or restaurants, is available. You can
search for a POI by selecting the category (or
entering the POI Name).
Searching for POIs using preset
categories
The preset search allows you to quickly find
the most frequently selected types of POIs.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [New Route].
The "New Route to..." screen appears.
4 Touch [Places].
The "Places" screen appears.
The preset search categories are as follows.
! Gas Stations Along Route:
! Accommodation At My Destination:
! Restaurant Along Route:
! Parking At My Destination:
32
En
p When the route is not set, they are searched
around the current position.
p When the current position is not available
either (no GPS signal), they are searched
around the last known position.
5 Touch the category you want.
Finally, the results appear in a list.
6 Touch the POI you want.
The searched location appears on the Map
screen.
# If you touch , you can sort the results or
show the locations of all facilities on the map.
7 Touch [Select as Destination].
After a short summary of the route para-
meters, a map appears showing the entire
route. The route is automatically calculated.
p If needed, you can change some of the
route setting parameters before selecting a
destination.
= For details, refer to "Route Preferences"
settings on page 48.
8 Touch [Start Navigation].
Your navigation system starts the route gui-
dance.
p If needed, you can select from different
route alternatives or change the route plan-
ning method before starting navigation.
= For details, refer to Checking route alter-
natives when planning the route on page
39.