Watching The Simulation Of The Route - Pioneer AVIC-8000NEX Operation Manual

Chapter
06 Checking and modifying the current route
Displays detailed information about the
route. There are also additional icons for
displaying all detailed information, only
freeways, and only toll roads.
! Alternatives:
Lists the route alternatives.
Watching the simulation of the
route
You can run a simulated navigation that de-
monstrates the current route. Follow the steps
below.
1 Set a route to your destination.
= For details, refer to Chapter 5.
2 Press the MAP button.
The Map screen appears.
3 Touch the following key.
Displays the navigation menu on
the Map screen.
4 Touch [Route Summary].
The "Route Summary" screen appears.
5 Touch the following key.
Displays the list of additional fea-
tures on the certain screen.
6 Touch [Simulation].
The simulation starts from the starting point of
the route, and using a realistic speed, it leads
you through the whole recommended route.
p During simulation, you can use the follow-
ing control keys (they disappear after a few
42
En
seconds but you can open them again by
touching the map).
Jumps to the previous gui-
dance point (maneuver).
Pauses the simulation.
Jumps to the next guidance
point (maneuver).
Increases the speed of the si-
mulation to four, eight or 16
times faster. Touching the key
again returns to the normal
speed.
# Touch [Close] to stop the simulation.