Pioneer AVIC-8000NEX Operation Manual page 173

Pioneer avic-8000nex; avic-7000nex; avic-6000nex; avic-5000nex; avic-x8610bs multimedia navigation receiver
Hide thumbs Also See for AVIC-8000NEX:
Table of Contents

Advertisement

Audio adjustments
1
Stop the vehicle in a quiet place, close
all the doors, windows and sun roof, and
then turn the engine off.
If the engine is left running, engine noise may
prevent correct Auto EQ.
p If driving restrictions are detected during
measurement, measurement is canceled.
2
Fix the microphone for acoustical mea-
surement (sold separately) in the center of
the headrest of the driver's seat, facing for-
ward.
The Auto EQ may differ depending on where
you place the microphone. If desired, place
the microphone on the front passenger seat
and perform Auto EQ.
3
Disconnect the iPhone or smartphone
device.
4
Turn on the ignition switch (ACC ON).
If the vehicle's air conditioner or heater is
turned on, turn it off. Noise from the fan in the
air conditioner or heater may prevent correct
Auto EQ.
5
Switch the AV source to "OFF".
= For details of the operations, refer to Dis-
playing the AV operation screen on page 20.
6
Press the HOME button to display the
Top menu screen.
7
Touch the following keys in the follow-
ing order.
The "Audio" screen appears.
8
Touch [A-EQ&TA Measurement].
The "A-EQ&TA Measurement" screen ap-
pears.
9
Connect the microphone for acoustical
measurement (sold separately) with this
product.
8000NEX 7000NEX
Plug the microphone into the microphone
input jack on this product.
6000NEX 5000NEX X8610BS
Connect the microphone with the mini-jack ex-
tension cable, and then plug it into the auxili-
ary input jack on this product.
= For details of the operations, refer to the In-
stallation Manual.
Chapter
32
173
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-5000nexAvic-7000nexAvic-x8610bsAvic-6000nex

Table of Contents