Sound" Settings; Warnings" Settings - Pioneer AVIC-8000NEX Operation Manual

Chapter
10 Customizing preferences of the navigation

"Sound" settings

Master
You can adjust the volume of all sound types.
Voice
You can adjust the volume of the guidance
sounds (verbal instructions).
Alert Beeps
You can adjust the volume of the non-verbal
alert sounds (beeps).
Ding
You can turn off the attention tone that pre-
cedes the verbal instructions or adjust its vo-
lume.
Voice Guidance
You can enable or disable voice guidance. This
function is enabled by default.
Announce Streets and Roads in Native
Language Area : Numbers and Names
You can decide whether to have the navigation
system announce the street names in the na-
tive language of the area, only the road num-
bers, or only the maneuvers.
Announce Streets and Roads in Foreign
Language Area : Numbers and Names
You can decide whether to have the navigation
system read the street names in a foreign
country, only the road numbers, or only the
maneuvers.
Early Indication of Maneuvers
You can decide whether you want an immedi-
ate announcement for the next maneuver or to
receive the information when the turn is near.
Verbosity Level
You can set the verbosity of the voice instruc-
tions: how much information is given and how
often the prompts occur.
! Minimal: Voice instructions are given once
right before the next maneuver.
! Medium: Voice instructions are given once
as the vehicle approaches the next maneu-
50
En
ver and it is repeated right before the man-
euver.
! Verbose: Voice instructions are given once
relatively far from the next maneuver, it is
repeated as the vehicle approaches the
next turn, and it is repeated again right be-
fore the actual maneuver.
Announce Route Summary
Whenever a route is calculated, this naviga-
tion system can read out the quick summary
of the route.
Announce Traffic Info
8000NEX 7000NEX 6000NEX
When a traffic message is received, this navi-
gation system can read out the message.
Announce System Messages
When a system message appears, this naviga-
tion system can read out the message.

"Warnings" settings

p This system is able to warn you if you ex-
ceed the current limit. This information
may not be available for your region (ask
your local dealer), or may not be fully cor-
rect for all roads in the map.
p You must ensure on your own liability that
using this feature is legal in the country
where you intend to use it.
Speed Warning
! Warn When Speeding
You can decide whether you want to receive
visible and/or audible warnings. Adjust the
slider to set the relative speed above which
the application initiates the warning.
The following alert types are available:
— Audio and Visual: When selected, audi-
ble and visible warnings will go off
when you exceed the speed limit.
— Visual: When selected, visible warnings
will go off when you exceed the speed
limit.
! Speed limit always visible