Pioneer AVIC-8000NEX Firmware Update Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Car Receiver
  5. AVIC-8000NEX
  6. Firmware update manual

Pioneer AVIC-8000NEX Firmware Update Manual

System firmware update instructions
Hide thumbs Also See for AVIC-8000NEX:
1
2
3
4
5
6

Advertisement

Table of Contents

System Firmware Update Instructions for AVIC-8000NEX
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order described below.
In order to perform this update, you will need a blank USB storage device or SD card, 2 GB or larger in
capacity, formatted to FAT32.
IMPORTANT (For navigation system users)
•
Once you install this firmware, all navigation function settings will be reset to factory default. Once
the update has finished, you will need to reconfigure these settings.
CAUTION
•
The only USB port that supports the firmware update is USB port 1.
•
DO NOT turn your unit off, eject the SD memory card or disconnect the USB storage device while
the firmware is being updated.
•
You can only update the firmware when the vehicle is stopped and the parking brake is engaged.

Displaying the firmware version

Check whether the firmware of your unit needs to be updated by checking the version number of the
firmware.
Procedure:
1.
Press the HOME button to display the Top menu screen.
2.
Touch the following keys in the following order.
The "System" screen appears
3.
Scroll down the list.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVIC-8000NEX and is the answer not in the manual?

Questions and answers

Related Manuals for Pioneer AVIC-8000NEX

Summary of Contents for Pioneer AVIC-8000NEX

  • Page 1 System Firmware Update Instructions for AVIC-8000NEX IMPORTANT Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and in the order described below. In order to perform this update, you will need a blank USB storage device or SD card, 2 GB or larger in capacity, formatted to FAT32.
  • Page 2 Updating the firmware on your unit IMPORTANT • DO NOT perform any further steps of this firmware update if the model number is anything other than AVIC-8000NEX. • Disconnect any mobile devices that are currently connected to your unit. •...
  • Page 3 located within the root (top) folder of the storage device. There should be no other files within the storage device. 4. Insert the SD card into the SD card slot or connect the USB storage device to the USB port 1 of the receiver.
  • Page 4 10. Touch [Firmware Update]. The “Firmware Update” screen appears. 11. Touch [Continue] to display the data transfer mode. Wait for the file check to finish.
  • Page 5 12. Touch [Start]. Note: Images are for illustration purposes only. Actual version number may differ. (Please note: Approximately one minute after the update has Progress status is shown. started, the receiver will restart itself and return to the update screen below.) 13.
  • Page 6 The “System” screen appears Scroll down the list. Touch [System Information]. Touch [Firmware Information]. After the “Firmware Information” screen appears, verify that the firmware version is 1.10. © 2015 Pioneer Electronics (USA) Inc.

Table of Contents