Searching For And Selecting A Location; Searching For A Location By Address - Pioneer AVIC-8000NEX Operation Manual

Searching for and selecting a location

CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the parking brake before
setting your route.
p Some information regarding traffic regula-
tions depends on the time when the route
calculation is performed. Thus, the infor-
mation may not correspond with a certain
traffic regulation when your vehicle actually
passes through the location in question.
Also, the information on the traffic regula-
tions provided applies for a passenger vehi-
cle, and not for a truck or other delivery
vehicles. Always follow the actual traffic
regulations when driving.
Searching for a location by
address
The most frequently used function is "Ad-
dress", in which the address is specified and
the location is searched.
p Depending on the search results, some
steps may be skipped.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [New Route].
The "New Route to..." screen appears.
4 Touch [Address].
The "Find Address" screen appears.
5 Touch the following key and set the
destination you are looking for.
! Country:
By default, your navigation system proposes
the country where you are.
! City:
By default, your navigation system proposes
the city/town where you are. You can select
the city/town using its postal code instead
of its name.
! Street:
If the street name is not available, touch
[Go to City] and select the city/town. This
way the center of the selected city/town be-
comes the destination of the route.
! House Number / Intersection:
This key will be active after you have set a
street. If the house number is not available,
touch [Go to Street] and select the street.
This way the center of the selected street
becomes the destination of the route.
After you touch the selected address to finish
the address search, the searched location ap-
pears on the Map screen.
6 Touch [Select as Destination].
After a short summary of the route para-
meters, a map appears showing the entire
route. The route is automatically calculated.
p If needed, you can change some of the
route setting parameters before selecting a
destination.
= For details, refer to "Route Preferences"
settings on page 48.
7 Touch [Start Navigation].
Your navigation system starts the route gui-
dance.
Chapter
05
31
En