Pioneer AVIC-8000NEX Operation Manual page 161

System settings
The installation position of this product is
shown. If installed correctly, "OK" appears.
Indicates whether the installation position
of this product is correct or not. When this
product is installed at an extreme angle ex-
ceeding the limitation of the installing
angle, "NOK(Installation Angle)" will be
displayed. When the angle of this product
has been changed, "NOK(Vibration)" will
be displayed.
4 Speed Pulse
The Speed Pulse value detected by this pro-
duct is shown. "0" is shown while the vehi-
cle is stationary.
5 Illumination
When the headlights or small lamps of the
vehicle are on, "ON" is displayed. When the
small lamps of the vehicle are off, "OFF" is
displayed. (If the orange/white lead is not
connected, "OFF" appears.)
6 Back Signal
When the shift lever is shifted to "R", the
signal switches to "High" or "Low". (One of
these is displayed depending on the vehi-
cle.)
7 iDataLink
When the optional iDatalink adapter is con-
nected and the protocol version matches,
"OK" is displayed. If the version does not
match, "Unsupported version" is dis-
played. If the optional iDatalink adapter is
not connected, "NOK" is displayed.
Chapter
31
161
En