Download Print this page

Pioneer AVIC-X8610BS Firmware Update Manual

System firmware update instructions.
Hide thumbs
   

Advertisement

System Firmware Update Instructions for AVIC-X8610BS
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order described below.
In order to perform this update, the following items are needed:
Pioneer AVIC-X8610BS
One of the following storage devices:
- USB storage device
- microSD card
microSD card and USB storage device requirements:
- 2 GB or larger in capacity, formatted to FAT32
- Should be blank (should not contain any files)
IMPORTANT (For navigation system users)
Once you install this firmware, all navigation function settings will be reset to factory default. Once
the update has finished, you will need to reconfigure these settings.
CAUTION
The only USB port that supports the firmware update is USB port 1.
DO NOT turn your unit off, eject the SD memory card or disconnect the USB storage device while
the firmware is being updated.
You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
Displaying the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number of the
firmware.
Procedure:
1.
Press the HOME button to display the Top menu screen.
2.
Touch the following keys in the following order.
The "System" screen appears

Advertisement

   Also See for Pioneer AVIC-X8610BS

   Related Manuals for Pioneer AVIC-X8610BS

   Summary of Contents for Pioneer AVIC-X8610BS

  • Page 1

    System Firmware Update Instructions for AVIC-X8610BS IMPORTANT Please download and print these firmware update instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and in the order described below. In order to perform this update, the following items are needed: ...

  • Page 2

    Scroll down the list. Touch [System Information]. Touch [Firmware Information]. After the “Firmware Information” screen appears, check the firmware version number. Verify that the firmware on your unit is not already 1.08.

  • Page 3

    Updating the firmware on your unit IMPORTANT  DO NOT perform any further steps of this firmware update if the model number is anything other than AVIC-X8610BS.  Disconnect any mobile devices that are currently connected to your unit. ...

  • Page 4

    9. Touch [System Information]. 10. Touch [Firmware Update]. The “Firmware Update” screen appears. 11. Touch [Continue] to display the data transfer mode.

  • Page 5

    Wait for the file check to finish. 12. Touch [Start]. Note: Images are for illustration purposes only. Actual version number may differ. (Please note: Approximately one minute after the update has Progress status is shown. started, the receiver will restart itself and return to the update screen below.) 13.

  • Page 6

    14. Press the HOME button. 15. Remove the SD card or USB storage device. 16. The firmware update is complete. Confirm that the firmware has been updated Procedure: Press the HOME button to display the Top menu screen. Touch the following keys in the following order. The “System”...

  • Page 7

    Touch [Firmware Information]. After the “Firmware Information” screen appears, verify that the firmware version is 1.08. ©2014 Pioneer Electronics (USA)

This manual also for:

Avh-4000nex, Avic-8000nex

Comments to this Manuals

Symbols: 0
Latest comments: