Scanning In Hand-Held Mode; Scanning With The Digital Scanner - Motorola Symbol DS3407 Product Reference Manual

Scanning in Hand-Held Mode

Install and program the digital scanner (see
Scanning on page 5-7
Motorola Enterprise Mobility Support.

Scanning with the Digital Scanner

Ensure all connections are secure (see the appropriate host chapter).
1.
Aim the digital scanner at the bar code.
2.
Press and hold the trigger.
3.
Scanning in Hand-Held Mode
Figure 2-2
The digital scanner projects a red laser aiming pattern which allows positioning the bar code or object within
4.
the field of view. If necessary, the digital scanner turns on its red LEDs to illuminate the target bar code.
The DS3407 Aim Dot version uses a center aiming dot rather than a cross for increased visibility in bright
lighting conditions. With Picklist Mode enabled by default in this version, it is ideal for scanning one bar code
among many in a small area.
Standard Pattern
Laser Aiming Patterns
Figure 2-3
Setting Up the Digital Scanner on page
for DS3407-DP (DPM) digital scanning. For assistance, contact the local supplier or
Aim Dot Pattern
Scanning 2 - 5
1-3). In addition, see DPM