Codabar (Nw - 7); Enable/Disable Codabar; Set Lengths For Codabar - Motorola Symbol DS3407 Product Reference Manual

Codabar (NW - 7)

Enable/Disable Codabar

Parameter # 07h
To enable or disable Codabar, scan the appropriate bar code below.
Enable Codabar

Set Lengths for Codabar

Parameter # L1 = 18h, L2 = 19h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length - Select this option to decode only Codabar symbols containing a selected length.
Select the length using the numeric bar codes in
only Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed by 4.
To correct an error or to change the selection, scan Cancel on
•
Two Discrete Lengths - Select this option to decode only Codabar symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only Codabar symbols containing either 2 or 14 characters, select Codabar - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan
Cancel on page
•
Length Within Range - Select this option to decode a Codabar symbol with a specific length range.
Select lengths using numeric bar codes in
Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length Within Range.
Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the
selection, scan Cancel on
•
Any Length - Scan this option to decode Codabar symbols containing any number of characters within the
digital scanner's capability.
(01h)
D-3.
page D-3.
*
Disable Codabar
Appendix D, Numeric Bar
page D-3.
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
Symbologies 10 - 45
(00h)
Codes. For example, to decode
Codes. For
For example, to decode