Motorola Symbol DS3407 Product Reference Manual page 350

B - 6 Symbol DS3407 Product Reference Guide
Modifier Characters (Continued)
Table B-3
Code Type
EAN.UCC
Composites
(GS1 DataBar,
GS1-128,
2D portion of UPC
composite)
PDF417,
Micro PDF417
Option Value
Native mode transmission.
Note: UPC portion of composite is transmitted using UPC rules.
0 Standard data packet.
1 Data packet containing the data following an encoded symbol separator
character.
2 Data packet containing the data following an escape mechanism
character. The data packet does not support the ECI protocol.
3 Data packet containing the data following an escape mechanism
character. The data packet supports the ECI protocol.
GS1-128 emulation
Note: UPC portion of composite is transmitted using UPC rules.
1 Data packet is a GS1-128 symbol (i.e., data is preceded with ]JC1).
0 Reader set to conform to protocol defined in 1994 PDF417 symbology
specifications. Note: When this option is transmitted, the receiver
cannot reliably determine whether ECIs have been invoked or whether
data byte 92
1 Reader set to follow the ECI protocol (Extended Channel
Interpretation). All data characters 92
2 Reader set for Basic Channel operation (no escape character
transmission protocol). Data characters 92
When decoders are set to this mode, unbuffered Macro symbols and
symbols requiring the decoder to convey ECI escape sequences
cannot be transmitted.
3 The bar code contains a GS1-128 symbol, and the first codeword is
903-907, 912, 914, 915.
4 The bar code contains a GS1-128 symbol, and the first codeword is in
the range 908-909.
5 The bar code contains a GS1-128 symbol, and the first codeword is in
the range 910-911.
Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is
transmitted as ]L2ABCD.
Option
has been doubled in transmission.
DEC
DEC
are doubled.
are not doubled. Note:
DEC