Imaging Preferences; Operational Modes - Motorola Symbol DS3407 Product Reference Manual

5 - 4 Symbol DS3407 Product Reference Guide

Imaging Preferences

The parameters in this chapter control image capture characteristics. Image capture occurs in all modes of
operation, including decode, video, and snapshot.

Operational Modes

The digital scanner has three modes of operation:
•
Decode Mode
•
Snapshot Mode
•
Video Mode.
Decode Mode
By default, when you pull the trigger the digital scanner attempts to locate and decode enabled bar codes within its
field of view. The digital scanner remains in this mode as long as you hold the trigger or until a successful decode.
Snapshot Mode
Use Snapshot Mode to capture a high-quality image and transmit it to the host. To temporarily enter this mode scan
the Snapshot Mode bar code. While in this mode the digital scanner blinks the green LED at 1-second intervals to
indicate it is not in standard operating (decode) mode.
In Snapshot Mode, the digital scanner turns on its laser aiming pattern to highlight the area to capture in the image.
The next trigger pull instructs the digital scanner to capture a high quality image and transmit it to the host. A short
time may pass (less than 2 seconds) between when you pull the trigger and image capture as the digital scanner
adjusts to the lighting conditions. Hold the digital scanner steady until the image is captured, denoted by a single
beep.
If you do not press the trigger within the Snapshot Mode Timeout period, the digital scanner returns to Decode
Mode. Use Snapshot Mode Timeout on page 5-12
seconds.
To disable the laser aiming pattern during Snapshot Mode, see
Video Mode
In this mode the digital scanner behaves as a video camera as long as you hold the trigger. Releasing the trigger
returns the digital scanner to Decode Mode. Scan this bar code to temporarily enter Video Capture Mode.
Snapshot Mode
to adjust this timeout period. The default timeout period is 30
Snapshot Aiming Pattern on page
Video Mode
5-12.