Scanning In Hand-Held Mode; Scanning With The Mt20X0; Aiming; Imager Aiming - Motorola Symbol MT2070 User Manual

3 - 4 Symbol MT2070/MT2090 User Guide

Scanning in Hand-Held Mode

IMPORTANT A scan application, such as Scan Item (scanitem.exe), must be launched to allow scanning. See

Scanning with the MT20X0

When out of the IntelliStand or removed from the wall mount bracket, the device operates in standard trigger mode.
Aim the device at a bar code and pull the trigger to decode.
Scanning in Hand-Held Mode
Figure 3-1
Hold the trigger until the device beeps, indicating the bar code is successfully decoded. For more information on
beeper and LED definitions, see

Aiming

Imager Aiming

When scanning, the device projects a red laser aiming pattern which allows positioning the bar code within its field
of view. See Decode Distances on page 3-8
Imager Aiming Pattern
Figure 3-2
If necessary, the device turns on its red LEDs to illuminate the target bar code.
Scan Item on page 2-17 for more information.
Table 3-1 and
for the proper distance to achieve between the device and a bar code.
Table 3-2.