Decode Mirror Images (Data Matrix Only); Scanstand Session Timeout - Motorola Symbol DS3407 Product Reference Manual

4 - 12 Symbol DS3407 Product Reference Guide

Decode Mirror Images (Data Matrix Only)

Parameter # F1h 19h
Select an option for decoding mirror image Data Matrix bar codes:
•
Always - decode only Data Matrix bar codes that are mirror images
•
Never - do not decode Data Matrix bar codes that are mirror images
•
Auto - decode both mirrored and unmirrored Data Matrix bar codes.

Scanstand Session Timeout

Parameter # F0h, 90h
To set the amount of time the digital scanner attempts to decode a bar code in presentation (blink) mode, scan the
bar code below. Next, scan three numeric bar codes from
between 1 and 255 that represents tenths of a second. Enter a leading zero for single digit numbers. For example,
to set 0.5 seconds, scan the bar code below, then scan the 0, 0, 5 bar codes. To correct an error or change the
selection, scan Cancel on
*Never
(00h)
Auto
(02h)
page D-3. The default value is 2 seconds.
Scanstand Session Timeout
Always
(01h)
Appendix D, Numeric Bar Codes to select a value