Scanning In Hand-Held Mode; Scanning With The Digital Scanner - Motorola Symbol DS6607 Product Reference Manual

2-6 Symbol DS6607 Product Reference Guide

Scanning in Hand-Held Mode

Install and program the digital scanner (see
Motorola Enterprise Mobility Support.

Scanning with the Digital Scanner

1. Ensure all connections are secure (see the appropriate host chapter.)
2. Aim the digital scanner at the bar code.
3. When the digital scanner senses movement, in its default Auto Aim trigger mode, it projects a red laser aiming pattern
(shown in Figure 2-3) which allows positioning the bar code or object within the field of view. (To turn off the default Auto
Aim trigger mode, see
If necessary, the digital scanner turns on its red LEDs to illuminate the target bar code.
4. Center the symbol in any orientation within the aiming pattern. Be sure the entire symbol is within the rectangular area
formed by the brackets in the pattern.
Setting Up the Digital Scanner on page
Figure 2-2. Scanning in Hand-Held Mode
Trigger Mode on page 4-10.)
Figure 2-3. Laser Aiming Pattern
1D bar code
Linear bar code
Aiming Pattern
Figure 2-4. Centering Symbol in Aiming Pattern
1-4). For assistance, contact the local supplier or
2D bar code
PDF417 symbol
Symbol