Discrete 2 Of 5 (Dtf); Enable/Disable Discrete 2 Of 5 - Motorola Symbol DS3407 Product Reference Manual

Discrete 2 of 5 (DTF)

Enable/Disable Discrete 2 of 5

Parameter # 05h
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Enable Discrete 2 of 5
Set Lengths for Discrete 2 of 5
Parameter # L1 = 14h, L2 = 15h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for D 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length - Select this option to decode only D 2 of 5 symbols containing a selected length.
Select the length using the numeric bar codes in
only D 2 of 5 symbols with 14 characters, scan D 2 of 5 - One Discrete Length, then scan 1 followed by 4.
To correct an error or to change the selection, scan Cancel on
•
Two Discrete Lengths - Select this option to decode only D 2 of 5 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only D 2 of 5 symbols containing either 2 or 14 characters, select D 2 of 5 - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan
Cancel on page
•
Length Within Range - Select this option to decode a D 2 of 5 symbol with a specific length range.
Select lengths using numeric bar codes in
of 5 symbols containing between 4 and 12 characters, first scan D 2 of 5 - Length Within Range. Then
scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change the
selection, scan Cancel on
•
Any Length - Scan this option to decode D 2 of 5 symbols containing any number of characters within the
digital scanner's capability.
(01h)
D-3.
page D-3.
*
Disable Discrete 2 of 5
Appendix D, Numeric Bar
page D-3.
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
Symbologies 10 - 43
(00h)
Codes. For example, to decode
Codes. For
For example, to decode D 2