4 - 8
Symbol DS3407 Product Reference Guide
Trigger Mode
Parameter # 8Ah
Select one of the following trigger modes for the digital scanner:
•
Level - A trigger pull activates decode processing. Decode processing continues until a successful decode,
you release the trigger, or the Decode Session Timeout occurs.
•
Blink - In presentation (scanstand) mode, the digital scanner activates decode processing when it detects a
bar code in its field of view. Decoding range is reduced in this mode.
•
Auto Aim - This trigger mode turns on the red laser aiming pattern when the digital scanner senses motion.
After 2 seconds of inactivity the red laser aiming pattern automatically shuts off.
•
Host - A host command issues the triggering signal. The digital scanner interprets an actual trigger pull as a
Level triggering option.
*
Auto Aim
Level
(00h)
(09h)
Blink
(07h)
Host
(08h)