Exposure Time
Parameter # F4h, F0h, 38h
This parameter is only available when Image Capture Autoexposure is disabled. Exposure time controls the
amount of time the digital scanner is allowed to collect light, much like the shutter speed for a camera. Generally,
the brighter the environment, the lower the exposure time. Set the manual exposure time to one of the following
values: 5 ms, 10 ms, 15 ms, 20 ms, 25 ms, or 30 ms. Increasing the exposure time past 20 ms increases the risk of
blurring the image due to hand jitter.
5 ms
(004Fh)
15 ms
(00ECh)
25 ms
(018Ah)
Imaging Preferences 5 - 11
*10 ms
(009Dh)
20 ms
(013Bh)
30 ms
(01D8h)