Scanning in Hand-Held Mode
Install and program the digital scanner (see
the local supplier or Motorola Enterprise Mobility Support.
Scanning with the Digital Scanner
Ensure all connections are secure (see the appropriate host chapter.)
1.
Aim the digital scanner at the bar code.
2.
Scanning in Hand-Held Mode
Figure 2-2
When the digital scanner senses movement, in its default Auto Aim trigger mode, it projects a red laser aiming
3.
pattern which allows positioning the bar code or object within the field of view. (To turn off the default Auto Aim
trigger mode, see
Laser Aiming Pattern
Figure 2-3
If necessary, the digital scanner turns on its red LEDs to illuminate the target bar code.
Setting Up the Digital Scanner on page
Trigger Mode on page
4-8.)
Scanning
2 - 5
1-2). For assistance, contact