On Screen Display (Osd) Menu Functions - Hatteland HD 12T04 series User Manual

On Screen Display (OSD) Menu Functions

BRIGHTNESS AND CONTRAST: (No function for DVI signals)
2
Selecting this function will enable the user to adjust brightness and contrast
4
for the display.
(No Function in DVI) BRIGHTNESS:
(No Function in DVI) CONTRAST:
COLOR TEMPERATURE
2
Selecting this function will enable the user to modify the warmness of the picture.
4
Higher temperature = "cooler" picture. Lower temperature = "warmer" picture.
User can select between presets 9500K, 8000K, 6500K, and 5000K color temperature measured
in Kelvin. User can also manually adjust the color temperature in R,G and B values by clicking on
"Color Temperature Adjust" and enter its sub-menu.
1
2
FREQUENCY AND PHASE: (Some functions not available in DVI mode)
Selecting this function will enable the user to modify the image horizontal size and
fine tune the image quality.
(No Function in DVI) FREQUENCY:
(No Function in DVI) PHASE:
(No Function in DVI) SHARPNESS:
PICTURE TYPE:
AUTO SETUP:
VIDEO ADJUSTMENT:
Selecting this function will enable the user to modify the color saturation of the
3 4
video signal along with tint and sharpness.
COLOR:
TINT:
SHARPNESS:
PICTURE TYPE:
VIDEO TYPE:
VIDEO SYSTEM:
Selecting this function will enable the user to select video system and input signals.
4
3
AUTO
NTSC / NTSC 4.43
PAL / PAL M
SECAM
Operation
IND100064-14
Increase/decrease brightness level, total: 100 steps
Increase/decrease contrast level, total: 100 steps
:
Increase/decrease the image horizontal size.
Fine tune the data sampling position (adjust image quality.)
Increase/decrease video image sharpness level.
Motion / Still (Adjustment for best image quality)
If graphics on screen move a lot, select "Motion"
If graphics on screen are mostly still, select "Still"
Use this to automatically adjust/fine tune/sync the incoming
signal to automatic default and optimal values gathered
from the graphics controller and the incoming signal.
Increase/decrease video color level.
Increase/decrease tint level.
Increase/decrease video image sharpness level.
Motion / Still / Normal (Adjustment for best image quality)
If graphics on screen move a lot, select "Motion"
If graphics on screen are mostly still, select "Still"
General motion - non flicker mode, select "Normal"
Change to best match the source signal. (DVD / VCR)
: Automatic detection of NTSC or PAL system. (Not applicable in SECAM)
: Manual select NTSC system.
: Manual select PAL system.
: Manual select SECAM system.
2
INB100026-1 (Rev 9)