The spilt cable is required for RS422/485 control of daisy-chained HATTELAND® Series 2 MMD displays.
Part Number
VSD100507-1
Illustration:
Screw pin suited for both
screwdriver and hand operation.
9 Pin DSUB - MALE
Pin Assignments:
PIN (MALE)
1
2
3
4
5
6
7
8
9
Accessories
Dimensions might be shown with or without decimals. Tolerance on drawings is +/- 1mm. For accurate measurements, use relevant DWG le available from Hatteland Display AS
IND100129-77
This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
: Hatteland Display AS
: DB9 Split Cable Male-Female+Female
: COM1 RS422/485 Serial Control Interface Accessory
: VSD100507-1
Type (Connectors)
DB9 Split Cable Male-Female+Female
JACKET
2
4
7
9
8
DRAIN WIRE
6
(7 Strands)
< - >
< - >
< - >
< - >
< - >
< - >
< - >
< - >
< - >
Note: All specifications are subject to change without prior notice!