Cables; Cable Entries & Connectors (Marked Area) - Illustration Only; Bottom View; Back View - Hatteland HD 12T04 series User Manual

General Installation Recommendations

Cables

Use only high quality shielded signal cables for RGB / DVI signals.
Cable Entries & Connectors (Marked area) - Illustration only

Bottom View

Back View

Maximum Cable Length
The signal cables should generally be kept as short as possible to provide a high quality output on
the display. The maximum cable length will depend on the signal resolution and frequency, but also
on the quality of the signal output from the computer. Recommended refresh rate is 60Hz.
Cables up to 10 meters generally provides good picture quality even with a 1600x1200 (UXGA)
60Hz signal. In most cases (especially with lower resolutions) even longer cables will provide a
satisfactory result. This should however be tested in advance before making the decision on how
far the unit can be placed from the signal source.
Installation 1
INB100026-1 (Rev 9)
IND100078-12