Osd Menu Functions - Hatteland HM 20T07 MIL User Manual

OSD Menu Functions

2
4
(No Function in DVI) BRIGHTNESS:
(No Function in DVI) CONTRAST:
2
4
1
2
(No Function in DVI) FREQUENCY:
(No Function in DVI) PHASE:
(No Function in DVI) SHARPNESS:
4
3
3 4
User Controls
IND100064-17
BRIGHTNESS AND CONTRAST: (No function in DVI mode)
Selecting this function will enable the user to adjust brightness and contrast
for the display.
COLOR TEMPERATURE
Selecting this function will enable the user to modify the warmness of the picture.
Higher temperature = "cooler" picture. Lower temperature = "warmer" picture.
User can select between 9500K, 8000K, 6500K, and 5000K color temperature measured in
Kelvin degrees. Press "+" to access the sub-menu, where the RGB values can be adjusted.
Use "+" and "-" buttons to adjust these values, and "MENU" to exit. (Saving is done automatically)
FREQUENCY AND PHASE: (Some functions not available in DVI mode)
Selecting this function will enable the user to modify the image horizontal size and
fine tune the image quality.
PICTURE TYPE
VIDEO ADJUSTMENT:
Selecting this function will enable the user to modify the color saturation of the
picture, tint and sharpness.
COLOR:
TINT:
SHARPNESS:
PICTURE TYPE
VIDEO TYPE
VIDEO SYSTEM:
Selecting this function will enable the user to select video system and input signals.
AUTO : Automatic detection of NTSC or PAL system. (Not applicable in SECAM)
NTSC / NTSC 4.43 : Manual select NTSC system.
PAL / PAL M : Manual select PAL system.
SECAM : Manual select SECAM system.
Increase/decrease brightness level, total: 100 steps
Increase/decrease contrast level, total: 100 steps
:
Increase/decrease the image horizontal size.
Fine tune the data sampling position (adjust image quality.)
Increase/decrease video image sharpness level.
: Motion / Still (Adjustment for best image quality)
If graphics on screen move a lot, select "Motion"
If graphics on screen are mostly still, select "Still"
Increase/decrease video color level.
Increase/decrease tint level.
Increase/decrease video image sharpness level.
: Motion / Still / Normal (Adjustment for best image quality)
If graphics on screen move a lot, select "Motion"
If graphics on screen are mostly still, select "Still"
General motion - non flicker mode, select "Normal"
: Change to best match the source signal. (DVD / VCR)
26
INB100005-8 (Rev 5)