Table of Contents
Advertisement
Specifications - HD 19T03 FOxx + HD MMD01-xxx
PRODUCT SPECIFICATIONS - HD 19T03 FOxx + HD MMD01-xxx
T E C H N I C A L D E S C R I P T I O N
TFT Characteristics:
• TFT Technology
: Color Active Matrix LCD Module
MVA Premium™ Technology (TFT)
• TFT Size
: 19.0 inch
• Pixel Number
: 1280 x 1024
• Pixel Pitch (RGB)
: 0.294 (H) x 0.294 (V) mm
• Response Time
: 12 ms (TYP) - black to white to black
• Contrast Ratio
: 600:1 (TYP)
: 450 cd/m 2 (TYP)
• Light Intensity
• Viewable Angle
: 89(Up/Down/Left/Right) (TYP)
• Active Display Area
: 376.32 (H) x 301.056 (V) mm
• Max Colors
: 16.7 millions
Synchronisation & Signals:
Analog RGB1 & RGB2:
• Separate, composite synchronisation & synchonisation on green.
• Interlaced and non interlaced
• Auto detects VGA -> UXGA
• VGA
• SVGA
• XGA
• SXGA
• UXGA
• Sync. Range Horizontal
• Sync. Range Vertical
DVI:
• Auto detects VGA -> XGA
Composite & S-Video:
• Interlaced PAL / NTSC / SECAM
Power Specifications:
Power Supply Options & Type Numbers:
• 115&230VAC - 50/60Hz
• 24 VDC
Power Consumption:
• Operating
T E S T I N G / A P P R O V A L S
Flange Models
IND100129-64
: 640 x 480 (including 640 x 350)
: 800 x 600 (including 720 x 400)
: 1024 x 768
: 1280 x 1024 (Recommended @ 60Hz)
: 1600 x 1200
: See "Preset Signal Timings" in user manual.
: See "Preset Signal Timings" in user manual.
: HD 19T03 FOxx + HD MMD01-xx1
: HD 19T03 FOxx + HD MMD01-xx2
: 66W (Max) (Brightness @ 100%)
This product have been tested / type approved by the following classification societies:
Note: All specifications are subject to change without prior notice!
M E C H A N I C A L D E S C R I P T I O N
Physical Considerations:
• 431 (W) x 387 (H) x 75 (D) mm (with flange)
• Weight: 9kg (approx)
User I/O Ports:
Behind Rubber Hatch - Front (FOAA / FOAC only):
• USB IN
: 1 x USB TYPE A (for loopthrough)
Backpack:
• DVI-I Signal IN
: 1 x 24Pin DVI-I (or as RGB IN with adapter)
• RGB Signal IN
: 1 x 15Pin HD D-SUB (female)
• Comp. Video IN
: 1 x RCA Phono (female)
• S-Video IN
: 1 x SVHS S-Video (female)
• USB OUT
: 1 x USB TYPE B (for loopthrough)
• COM1 RS232
: 1 x D-SUB 9P (female) (Serial Contr. Interface)
• If AC Power IN
: 1 x Std IEC Inlet (female)
• If DC Power IN
: 1 x Screw Terminals
Optional Solutions:
• COM2
: 1 x D-SUB 9P (female) (Feature Connector)
User Controls - FOBA / FOBC:
• Navigator Push Function
• Navigator -/+ Buttons Function
• Navigator Indicator
User Controls - FOAA / FOAC:
• Navigator Push Function
• Navigator Rotary Function
• Navigator Indicator
Environmental Considerations:
• Operating
: Temperature -15 deg. C to +55 deg. C
- Humidity 20% to 85% (non condensing)
• Storage
: Temperature -20 deg. C to +60 deg. C
- Humidity 5% to 85% (non condensing)
• IP Rating
: IP22 (FOAA/FOAC) or IP66 (FOBA/FOBC) models
• Compass Safe Dist. : HD 19T03 FOxx + HD MMD01-xxx
Standard: 80cm
To prevent heat to build up inside the display we recommend installing the unit in a
vertical position +/- 40 degrees maximum. We also recommend adding forced
cooling in applications where; Vertical mounting angle is above +/- 40 degrees --
Operating temperature is above 25C -- Ventilation area around unit is restricted.
Fans should be mounted to enhance natural airflow directed upwards through the unit.
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Options/Accessories:
• Resistive Factory Mounted Touchscreen (FOAC/FOBC+Cxx Backpack)4wire
• VSD100507-1 Split Cable RS422/485 - MALE to 2 x FEMALE 9P D-SUB
NOTE: Products with factory mounted touchscreen is not type approved
& C E R T I F I C A T E S
5
INB100026-1 (Rev 9)
: On/Off, OSD Menu, Hotkey
: Brightness, Menu Navigator
: Mode Status LEDs
: On/Off, OSD Menu, Hotkey
: Brightness, Menu Navigator
: Mode Status LEDs
Steering: 50cm
2/2
Advertisement
Table of Contents
