Removing A Non-Redundant Ac Power Supply - Dell PowerEdge T430 Owner's Manual

NOTE: When selecting or upgrading your system configuration, verify the system power
consumption with the Dell Energy Smart Solution Advisor at dell.com/ESSA to ensure optimum
power utilization.

Removing a non-redundant AC power supply

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
Steps
1. Disconnect all the power cables from the power supply to the system board, hard-drive backplane,
hard drives, and optical drives.
2. Remove the screw securing the power supply to the chassis and slide the power supply out of the
power supply unit cage.
124
Safety instructions.
Before working inside your system.