Installing The System Feet - Dell PowerEdge T430 Owner's Manual

Figure 11. Removing and installing the system feet
1. screw hole (4)
3. tab (12)
5. system feet (4)
Related Links

Installing the system feet

Installing the system feet
Prerequisites
CAUTION: Installing the feet on a stand-alone tower system is necessary to provide a stable
foundation for the system. Failure to install the feet poses the risk of having the system tip over,
possibly causing bodily injury or damage to the system.
1. Ensure that you read the
2. Keep the #2 Phillips screwdriver ready.
3. Lay the system on its side on a flat and stable surface.
Steps
1. Align the three tabs on the system feet with the three slots on the base of the chassis.
2. Secure the system feet to the base of the chassis by using the screws.
52
Safety instructions.
2. slot (12)
4. base of the tower
6. screw (4)