Installing The Cooling Shroud - Dell PowerEdge T430 Owner's Manual

Steps
Holding the touch points, lift the cooling shroud from the system.
NOTE: Systems with x16 hard-drive backplanes use a different cooling shroud. To ensure
proper cooling, always install the cooling shroud provided with your system.
Figure 17. Removing and installing the cooling shroud — 3.5 inch hard-drive system
1. chassis intrusion switch
3. slots (2)
Related Links

Installing the cooling shroud

Installing the cooling shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
62
2. touch points (2)
4. chassis intrusion-switch connector on
the system board